technical data sheet sma termination plug 1 watt 32s15b-1.0s3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 1 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg all dimensions are in mm; tolerances according to i so 2768 m-h interface according to iec 60169-15, en 122110, mil-std-348 documents n/a material and plating connector parts material plating center contact brass gold, min. 1.27 m, over chem ical nickel outer contact stainless steel passivated dielectric ptfe coupling nut stainless steel passivated gasket silicone substrate al 2 o 3
technical data sheet sma termination plug 1 watt 32s15b-1.0s3 rosenberger hochfrequenztechnik gmbh & co. kg p.o.box 1260 d-84526 tittmoning germany www.rosenberger.de tel. : +49 8684 18-0 email : info@rosenberger.de page 2 / 2 rf_35/09.14/6.2 dieses dokument ist urheberrechtlich geschtzt this document is protected by copyright rosenberger hochfrequenztechnik gmbh & co. kg electrical data impedance 50 w 5% frequency dc to 18 ghz return loss 3 32.2 db @ dc to 8 ghz 3 26.4 db @ 8 ghz to 12.4 ghz 3 19.1 db @ 12.4 ghz to 18 ghz center contact resistance 3 m w outer contact resistance 2 m w impulse power (1s, 1%) 100 watts at 25c environme nt temperature power handling (at 25 c, sea level) 1 w derated linearity to 0 watts at 125c mechanical data mating cycles 3 500 coupling nut retention 3 270 n coupling test torque 1.7 nm recommended torque 0.8 nm to 1.1 nm environmental data temperature range -55 c to +155 c rohs compliant tooling n/a suitable cables n/a weight 2.3 g/pce draft date approved date rev. engineering change n umber name date martin moder 18.03.16 j_krautenbacher 15.07.16 b00 15-1629 i_wallner 15.07.16 while the information has been carefully compiled t o the best of our knowledge, nothing is intended as representation or warr anty on our part and no statement herein shall be construed as recommendation to infringe existing patents. in the effort to impr ove our products, we reserve the right to make changes judg ed to be necessary.
|
